“Shielding” is tool that is used to reduce electromagnetic interference, or “EMI”, in your guitar’s signal. Since most electric guitar pickups are by definition “electromagnetic transducers”, EMI is a frequent cause of unwanted noise in the guitar’s signal chain. Guitars with single coil style pickups are especially prone to these issues.
Shielding an Electric Guitar Read More »
The pickguard art featured on the Gibson Hummingbird, as well as the “flower and vine” pattern used on the J-200, are defining features of the respective models. Originally the most expensive guitars in Gibson’s catalog, their unique pickguard’s make these instruments instantly recognizable.
In part due to the flexible material used, these pickguards are more likely to lift and curl around the edges than other modern pickguards.
Gibson Hummingbird and J-200 Pickguards Read More »
An acoustic guitar’s bridge and saddle work together to anchor and suspend the strings on the guitar body. During a setup, raising or lowering the saddle is one of the key adjustments to an instrument’s action. However, there are limits as to how far the saddle can be adjusted in either direction.
An acoustic guitar’s bridge and saddle work together to anchor and suspend the strings on the guitar body. During a setup, raising or lowering the saddle is one of the key adjustments to an instrument’s action. However, there are limits as to how far the saddle can be adjusted in either direction.
Acoustic Guitar Bridge String Ramping Read More »
A Pre-slotted string nut is one that has been manufactured so that the bulk of preliminary shaping and slotting has been done. This shortcuts some of the early steps that are required when hand-cuting a nut from a blank.
The benefit of these products is clear; They are a time saver for our busy shop and are more cost effective for our clients. We carry a variety that have been designed to fit popular instruments from brands like Fender, Gibson, Taylor, and Martin.
Installing a Pre-slotted String Nut Read More »
The Electrosocket screw-in style jack plate offers an improvement on the side mounted style of jack plate that is popular on Fender Telecaster style electric guitars. The purpose of a jack plate is to hold the guitar’s output jack stable so that it can support the guitar cable. When compared to the traditional design, the Electrosocket is better able to handle the stresses of cable insertion and removal, eliminating a common cause of crackling / intermittent signal to your guitar amp.
Electrosocket Modern Telecaster Jack Plate Read More »
A mortise and tenon joint is a centuries old method for connecting two pieces of wood. The “mortise” is a hole or recess cut into a part which is designed to receive a corresponding projection referred to as the “tenon” on another component so as to join the two pieces together.
The Martin Guitar Company has been using this style of joint to secure the neck onto the body of their student and player grade model instruments for decades.
Acoustic Guitar Neck Resets – Martin Mortise and Tenon Read More »
Though simple in appearance, the string nut serves a critical function for the instrument. Whether hand made or prefabricated, it is crucial that it be properly installed, and dressed.
Due to the demands of a production schedule, in our experience, most factory made guitars arrive with a nut that has had a cursory dressing and slotting at best. This sometimes leads players to seek a replacement when often a bit of fine tuning, through a service that we call a “dress and profile”, is all that is needed to get the nut working as it should.
String Nut – Dress and Profile Read More »
Strings are perhaps the single most important part of a guitar; Every other part of the instrument is designed to support or enhance the vibration produced by a picked or plucked string. A good set of strings is the first step in maintaining the best sound from your instrument.
Put another way, the guitar string is not unlike fuel to a car; Without them the guitar doesn’t go, they are consumed by the process, and they require regular replacement! As such, basic restringing is a necessary skill that we strongly encourage guitar players to learn how to do for themselves.
Restringing an Electric Guitar Read More »
Whether playing seated or standing, a guitar strap is a helpful tool for keeping your instrument in a comfortable playing position. Typically attached to two points on the guitars body called “strap buttons”, when new, a guitar strap may be so tightly fit as to be difficult to get on and off of the instrument’s standard strap buttons. Overtime the strap becomes broken in and as the material of the strap brakes down the straps attachment points may eventually become dangerously loose. If the strap fails the guitar may fall to the floor.
The addition of strap locks provide a convenient way to securely install and remove your instruments strap. Though fairly easy to install, it is worth taking a few moments to look at the most popular styles and discuss the proper way to attach them.
Guitar Strap Lock Installation Read More »
Solid body electric guitars typically use a variety of wood screws to secure the different components such as tuning machines, strap buttons, bridges, and pickguards to the body. The use of common wood screws provides a quick and secure method for installation and the eventual removal of the hardware when required. Though typically reliable, factors such as incorrect installation and storage, or heavy use, can lead to the need for maintenance and repair.
Stripped and Broken Screws on Guitars Read More »